Crane Hoist Remote Control
-
Introduction:
The remote controls for cranes and hoists consist of a sender and a receiver for controlling the hoist moving for lifting, lowering, moving forward, moving back, moving right moving left, etc. The signal sender can be a handpiece or a joystick-type controller.
It can be used for controlling the wire rope hoist, chain hoist, crab hoist, lifting winch, trolley on a bridge crane, gantry crane, suspension crane, jib crane, etc.
-
Features:
-
Sensitive contacts with quick reaction: The dust-proof structure and high-performance metal contact buttons ensures 12 million times pressing under 2.5N with 0 failures.
-
Customized function buttons with single speed buttons and dual speed buttons, start button, 1 mushroom head rotating emergency stop button.
-
Up to 20 control points.
-
Equipped with a key switch, turn to OFF and unplug the key to stop using the battery voltage warning device. If the voltage is insufficient, the automatic shutdown circuit can be connected to the computer via a data cable to set the button function mode.
-
Parameters:
-
Shell: Glass fiber reinforced nylon
-
Protection level: IP65
-
Frequency range: VHF: 310-331MHz: UHF: 425-446MHz
-
Transmission power: <10dBm -110dBm
-
Power supply for transmitter: 2 alkaline No. 5 batteries
-
Receiver power supply: 18-65V24V36V220V 380V (optional)
-
Security code: 32-bit (4.3 billion sets)
-
Operating temperature: -40 to +85℃
-
Control distance: Remote control distance within 100 meters in open environments
